We report on fully polarization-maintaining Er-doped fiber laser mode-locked by SESAM. After adjusting the mode spot area on the SESAM the laser demonstrates the harmonic mode-locking in the whole pump range up to ~355mW with the maximum pulse repetition rate (PRR) ~1145MHz while the supermode suppression level (SSL) does not exceed 25 dB. It is shown that optical injection of an external continuous wave (CW) into the laser cavity results in an increase of the SSL by two-three orders of magnitude. Moreover, it is shown that the CW injection makes it possible to increase the critical pump power and, accordingly, to raise the maximum laser PRR up to the value of ~2195 MHz. This operation does not degrade the quality of laser polarization. Performed numerical simulations allow explaining the observed effects qualitatively.
We report on the experimental and numerical studies exploring dynamical processes of soliton birth and annihilation of solitons in the laser ring cavity. The specific purpose of the research is focused on the exact control of the pulse repetition rate of a harmonically mode-locked fiber laser. We have demonstrated that the birth of a new pulse occurs from the soliton background (i.e., from the dispersive waves) through its shaping to the soliton or from the existing pulse through its splitting. The injection of external continuous wave (CW) allows one-by-one change of the number of solitons in the laser cavity thus enabling the fine-tuning of the pulse repetition rate. We present new experimental observations of the laser transition dynamics associated with the changes of the soliton numbers and give clear insight into the possible physical mechanisms responsible for these effects.
We report on the results of experimental and numerical studies enabling deep insight into the physical mechanisms underlying the supermode noise suppression in harmonically mode-locked (HML) fiber laser using the resonant continuous wave (CW) injection. In particular, we have proved experimentally that the supermode noise suppression effect is available only with the CW injected to the long-wavelength side of laser spectrum. Injection to the opposite side destroys the HML operation regime and leads to the formation of tight soliton bunch. Our numerical simulations confirm these specific features. To get the result, we have simulated phase-locking between the CW and a single soliton. Then, the developed model has been applied to the laser cavity operating multiple pulses in the presence of the gain depletion and recovery mechanism responsible for harmonic pulse arrangement. We clearly demonstrate how the CW injection accelerates or destroys the HML process enabling the generation of additional inter-pulse forces.
Photodynamic therapy is an effective modality for treating advanced melanoma. However, melanoma's inherent resistance to laser radiation hinders its widespread clinical application. The near-infrared laser radiation range of 1264-1270 nm offers unique properties: firstly, its ability to penetrate melanin-producing cells, and secondly, its capability to generate singlet oxygen without xenobiotics. We assess the impact of continuous wave 1265 nm laser radiation on an antioxidant defense system in melanoma B16-F10 and normal CHO-K1 cells. We observe a time-dependent increase in superoxide dismutase and glutathione-S-transferase activities, fluctuations in reduced glutathione levels, as well as a simultaneous increase in melanoma cell proliferation and cell death. We hypothesize that the differential activation of cellular antioxidant defense mechanisms contributes to melanoma cells' resilience to laser radiation.
Harmonically mode-locked (HML) fiber lasers delivering pulses with pulse repetition rate (PRR) in the GHz range have become a valuable alternative to semiconductor and solid-state lasers ensuring high beam quality, reliability, userfriendly light output, inherent to laser configurations in all-fiber format. The main drawback of HML laser technology is the noise-induced irregularities of the time interval between pulses known as the HML timing jitter. Ensuring low-level supermode noise and precise pulse repetition rate tuneability in all-fiber-integrated harmonically mode-locked laser sources establishes a new level of their versatility and extends areas of their applications. We report on new techniques enabling both the mitigation of supermode laser noise and highly precise setting of the PRR in a soliton fiber laser harmonically mode-locked by nonlinear polarization evolution. The principle of operation relies on resonant interaction between the soliton pulses and a narrow-band continuous wave (CW) component cooperatively generated within the same laser cavity.
Fiber ring laser harmonically mode-locked through nonlinear polarization evolution with the pulse repetition rate up to 6.75 GHz is demonstrated. We report on a new method of fine repetition rate tuning with the use of external continuous wave injected into the ring laser cavity. With this method, we have shown experimentally that the pulse repetition rate of the harmonically mode-locked laser can be tuned over a few GHz range with the minimal possible step equal to the fundamental frequency of the ring cavity.
We report on suppression of supermode noise in harmonically mode-locked fiber laser achieved through the injection of continuous wave (CW) into the laser cavity. Implementing this method, we have shown experimentally that supermode suppression level of harmonically mode-locked laser could be increased by 20-30 dB depending on the pulse energy of the mode-locked laser. Experiments have refined the requirements to the positions inside the laser spectrum assigned to the injected CW component, a Kelly soliton sideband, and the transparency peaks of the birefringent filter formed in the ring fiber cavity. The effect takes places at proximity of the injected CW to the Kelly sideband leading to phase-locking between the CW and the solitons.
We report on a new method for fabrication of saturable absorbers for operation in ring fiber lasers as a mode-locking element taking advantages of the manufacturing technologies of fiber couplers and microfiber tapers coated with carbon nanotubes. It is demonstrated in the experiment that the transmittance of the fabricated saturable absorber increases with an increase of the input radiation power. Also, we have shown that the fabricated saturable absorber enables generation of picosecond soliton pulses in ring fiber laser configuration.
Soliton fiber lasers with passive harmonic mode-locking (HML) have been known for several decades as reliable sources of pulse trains with a high repetition rate. They are commonly employed as frequency comb generators in a wide list of applications in spectroscopy, telecommunications, microwave photonics. Besides that exhibiting advantageous consumer properties, such as compactness, reliability, low cost and convenience of beam delivery approach these sources are among the most attractive alternatives for material processing, medicine lasers and other areas. In the first group of these lasers the HML occurs due to special intra-cavity periodic filter with a free spectral range (FSR) which is a multiple of the main cavity FSR and equals to the pulse repetition rate. The second group of HML lasers in this classification is attractive for the scientific community due to the automatic arrangement of strongly periodic pulse pattern in the laser cavity through pulse repulsion. However, it is difficult to specify the mechanism of pulse repulsion for each case. It can be based on interaction through saturating and relaxing dissipative parameters, continuous-wave (CW) radiation component, dispersion waves, or acoustic waves induced by electrostriction, etc. A common feature of all interaction induced effects is low intensity, in many cases only slightly exceeding the noise level. The noise-induced fluctuations in the time interval of the HML pulse train are known as HML timing jitter, and its value is significantly higher than the timing jitter in lasers operating at fundamental frequency. It is a major drawback of the HML laser technology. We report the stabilizing frequency shift effect in harmonic mode-locking ring soliton fiber laser that is studied theoretically and numerically. We demonstrate that the frequency shift contributes to an increase in the hardness of interpulse interactions and can led to stabilization of the periodic arrangement of pulses. The experiment carried out confirms the theoretical predictions and the results of numerical simulation.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.