Unspecified Victor V. Khitrov Profile

Victor V. Khitrov

Engineer

Publications (17)

Proceedings Article | 3 October 2022 Paper

Hollow-core photonics crystal fiber for CO2 leakage monitoring

William Delmas, Sarah Sahota, Allan Chang, Matthew Heyrich, Victor Khitrov, Tiziana Bond

Proceedings Volume 12229, 1222903 (2022) https://doi.org/10.1117/12.2632666

KEYWORDS: Optical fibers, Raman spectroscopy, Carbon monoxide, Fiber Bragg gratings, Carbon dioxide, Solids, Photonic crystal fibers, Diffusion, Spectroscopy, Biological and chemical sensing

Read Abstract +

Proceedings Article | 4 March 2022 Presentation + Paper

First demonstration of dispersion-shifted LMA silica fiber in a high-power 1.6-um laser

Charles Yu, Victor Khitrove, Paul Pax, Cody Mart, Mike Runkle, Mike Messerly, Jay Dawson, Jun Zhang, Mark Dubinskii

Proceedings Volume 11981, 119810S (2022) https://doi.org/10.1117/12.2608370

KEYWORDS: Raman spectroscopy, Fiber lasers, Fiber amplifiers, Dispersion, Optical fibers, Optical amplifiers, Modulation, Erbium, Multimode fibers, Diodes

Read Abstract +

Proceedings Article | 5 March 2021 Presentation + Paper

Progress on optical microspheres for CO2 sensors

B. Demory, S. Harrison, C. Tolfa, L. Echeveria, P. Singh, V. Khitrov, K. Heinz, A. S.-P. Chang, T. Bond

Proceedings Volume 11672, 116720R (2021) https://doi.org/10.1117/12.2583278

KEYWORDS: Sensors, Carbon dioxide, Optical fabrication, Microresonators, Gas sensors, Environmental sensing, Thermal optics, Tapered optical fibers, Spherical lenses, Resonators

Read Abstract +

Proceedings Article | 2 March 2020 Paper

Microresonators for compact optical sensors (uRCOS) for gas detection

Payal Singh, Logan Echeveria, Sara Harrison, Catherine Reinhardt, Victor Khitrov, Ken Heinz, Allan Chang, Gualtiero Nunzi-Conti, Daniele Farnesi, Tiziana Bond

Proceedings Volume 11266, 112661F (2020) https://doi.org/10.1117/12.2543815

KEYWORDS: Optical spheres, Carbon monoxide, Resonators, Etching, Glasses, Gases, Microresonators, Environmental sensing, Gas sensors, Tapered optical fibers

Read Abstract +

Proceedings Article | 26 February 2018 Paper

10W single-mode Nd3+ fiber laser at 1428nm

Victor Khitrov, Leily Kiani, Paul Pax, Derrek Drachenberg, Michael Messerly, Robert Crist, Nick Schenkel, Matt Cook, Jay Dawson

Proceedings Volume 10512, 105121P (2018) https://doi.org/10.1117/12.2284876

KEYWORDS: Fiber lasers, Neodymium, Fiber amplifiers, Waveguides, Silica, Laser development, High power fiber amplifiers, Diodes, Laser sources

Read Abstract +

Proceedings Article | 11 March 2016 Paper

Extremely low NA Yb doped preforms (<0.03) fabricated by MCVD

Vincent Petit, Richard Tumminelli, John Minelly, Victor Khitrov

Proceedings Volume 9728, 97282R (2016) https://doi.org/10.1117/12.2214546

KEYWORDS: Ytterbium, Fiber lasers, Structured optical fibers, Laser development, Refractive index, Cladding, Ions, Distortion, Chemical vapor deposition, Absorption, Laser applications

Read Abstract +

Proceedings Article | 12 March 2014 Paper

3kW single-mode direct diode-pumped fiber laser

V. Khitrov, J. Minelly, R. Tumminelli, V. Petit, E. Pooler

Proceedings Volume 8961, 89610V (2014) https://doi.org/10.1117/12.2037453

KEYWORDS: Fiber lasers, Diodes, Single mode fibers, Semiconductor lasers, Chemical vapor deposition, Oscillators, Ytterbium, Laser resonators, Continuous wave operation, Multiplexing

Read Abstract +

Proceedings Article | 4 May 2010 Paper

kW level narrow linewidth Yb fiber amplifiers for beam combining

Victor Khitrov, Kevin Farley, Ryan Leveille, Joshua Galipeau, Imtiaz Majid, Scott Christensen, Bryce Samson, Kanishka Tankala

Proceedings Volume 7686, 76860A (2010) https://doi.org/10.1117/12.862648

KEYWORDS: Fiber amplifiers, Optical amplifiers, Amplifiers, Fiber lasers, Ytterbium, Laser damage threshold, Absorption, Diodes, Optical properties, Laser development

Read Abstract +

Proceedings Article | 12 May 2009 Paper

400W monolithic high efficiency 2 µm MOPA

S. Christensen, T. Ehrenreich, V. Khitrov, K. Tankala, A. Carter, B. Samson

Proceedings Volume 7325, 73250C (2009) https://doi.org/10.1117/12.819311

KEYWORDS: Amplifiers, Diodes, Signal attenuation, Fiber amplifiers, Phase modulation, Free space, Oscillators, Semiconductor lasers, Standards development

Read Abstract +

Proceedings Article | 22 February 2008 Paper

50W single-mode linearly polarized high peak power pulsed fiber laser with tunable ns-μs pulse durations and kHz-MHz repetition rates

V. Khitrov, B. Samson, D. Machewirth, K. Tankala

Proceedings Volume 6873, 68730C (2008) https://doi.org/10.1117/12.763198

KEYWORDS: Pulsed laser operation, Amplifiers, Laser applications, Pulsed fiber lasers, Phase modulation, Fiber lasers, Diodes, Molybdenum, Distortion, Tunable lasers

Read Abstract +

Proceedings Article | 20 February 2007 Paper

High-peak power-pulsed single-mode linearly-polarized LMA fiber amplifier and Q-switch laser

V. Khitrov, B. Samson, D. Machewirth, D. Yan, K. Tankala, A. Held

Proceedings Volume 6453, 645305 (2007) https://doi.org/10.1117/12.712341

KEYWORDS: Fiber amplifiers, Fiber lasers, Q switching, Q switched fiber lasers, Oscillators, Phase modulation, Amplifiers, Pulsed laser operation, Optical amplifiers, Laser applications

Read Abstract +

Proceedings Article | 23 February 2006 Paper

1 kW, 15μJ linearly polarized fiber laser operating at 977 nm

V. Khitrov, D. Machewirth, B. Samson, K. Tankala

Proceedings Volume 6102, 610222 (2006) https://doi.org/10.1117/12.646715

KEYWORDS: Fiber lasers, Ytterbium, Phase modulation, Semiconductor lasers, Pulsed laser operation, Pulsed fiber lasers, Diodes, Wavelength division multiplexing, Laser applications, Polarization

Read Abstract +

Proceedings Article | 22 April 2005 Paper

Linearly polarized high-power fiber lasers with monolithic PM-LMA-fiber and LMA-grating based cavities and their use for nonlinear wavelength conversion

V. Khitrov, B. Samson, U. Manyam, K. Tankala, D. Machewirth, S. Heinemann, C. Liu, A. Galvanauskas

Proceedings Volume 5709, (2005) https://doi.org/10.1117/12.590825

KEYWORDS: Fiber lasers, Polarization, Fiber Bragg gratings, High power fiber lasers, Continuous wave operation, Diffraction, Laser resonators, Chemical oxygen iodine lasers, Diodes, Laser applications

Read Abstract +

Proceedings Article | 21 February 2005 Paper

Damage mechanisms in components for fiber lasers and amplifiers

Adrian Carter, Bryce Samson, Kanishka Tankala, David Machewirth, Victor Khitrov, Upendra Manyam, Francois Gonthier, Francois Seguin

Proceedings Volume 5647, (2005) https://doi.org/10.1117/12.592015

KEYWORDS: Fiber lasers, Cladding, Coating, Glasses, Reliability, Polymers, Fiber Bragg gratings, Interfaces, Continuous wave operation, Fiber coupled lasers

Read Abstract +

Proceedings Article | 8 October 2004 Paper

Continued advancements in the design of double clad fibers for use in high output fiber lasers and amplifiers

Adrian Carter, Kanishka Tankala, Bryce Samson, David Machewirth, Victor Khitrov, Upendra Manyam

Proceedings Volume 5662, (2004) https://doi.org/10.1117/12.596360

KEYWORDS: Optical fibers, Fiber lasers, Birefringence, Fiber amplifiers, Polarization, Cladding, Phase modulation, Ytterbium, Single mode fibers, Nonlinear dynamics

Read Abstract +

Fiber lasers have a number of distinct advantages over their more conventional solid state laser alternatives. These advantages include size, reliability, wavelength selectivity, heat dissipation, wall plug efficiency and operational cost. Furthermore they can be operated without the need for active cooling or optical alignment. Consequently the market for these more traditional laser sources are beginning to be eroded by the emergence of fiber lasers. In 1999 high power fiber lasers became a reality, with the world's first single-mode fiber laser exhibiting in excess of 100W cw output. However it was soon recognized that conventional small core, high NA fiber designs were not appropriate to applications requiring further scaling of the output power. More specifically it was found that the maximum achievable output power in such fibers were restricted by a fundamental susceptibility to optical nonlinearities, including stimulated Raman scattering (SRS), stimulated Brillouin scattering (SBS) and self-phase modulation. In order to overcome the limitations imposed by these parasitic nonlinear processes, it has been necessary to develop fibers with high rare-earth dopant concentrations in relatively large core, low numerical aperture fibers. These so-called large mode area (LMA) fibers are directly responsible for the recent explosion in demonstrated diffraction-limited beam quality output powers, now approaching the kW-level from a single fiber. To further scale the output power it is necessary to combine the output of several fiber lasers. Indeed, for a number of industrial and military applications it is desirable to scale the total output power to between several and hundreds of kW's. It is therefore advantageous to be able to coherently combine the beams from multiple fibers and this it turns makes it desirable for the fiber to also be polarization maintaining. This provides yet another layer of complexity to the fiber design but such fibers are now a commercial reality. In this paper we review the recent and ongoing advantages in fiber design that is facilitating the development and production of lasers and amplifiers with ever increasing output powers.

Proceedings Article | 7 June 2004 Paper

Large-mode-area double-clad fibers for pulsed and CW lasers and amplifiers

David Machewirth, Victor Khitrov, Upendra Manyam, Kanishka Tankala, Adrian Carter, Jaroslaw Abramczyk, Julia Farroni, Douglas Guertin, Nils Jacobson

Proceedings Volume 5335, (2004) https://doi.org/10.1117/12.528056

KEYWORDS: Optical fibers, Ytterbium, Cladding, Phase modulation, Amplifiers, Absorption, Fiber lasers, Reliability, Optical testing, Chemical oxygen iodine lasers

Read Abstract +

Proceedings Article | 8 March 2004 Paper

Development of a phase diagram to control composite manufacturing using Raman spectroscopy

Stuart Farquharson, Jessica Carignan, Victor Khitrov, Antonio Senador, Montgomery Shaw

Proceedings Volume 5272, (2004) https://doi.org/10.1117/12.512227

KEYWORDS: Manufacturing, Composites, Raman spectroscopy, Epoxies, Control systems, Process control, Spectroscopy, Molecular spectroscopy

Read Abstract +

Showing 5 of 17 publications

View contact details

UPDATE YOUR PROFILE

Is this your profile? Update it now.

Sign into your SPIE.org account

Don’t have a profile and want one?

Create an account on SPIE.org

Keywords/Phrases

Search In:

Publication Years