As part of the High order Advanced Keck Adaptive optics (HAKA) project, a state-of-the-art ALPAO 2844 actuator deformable mirror (DM) will replace the more than 25 years old 349 actuator DM on the Keck ⅠⅠ Adaptive Optics (AO) bench. The increase in the number of DM actuators requires a new set of pupil-relay optics (PRO) to map the 2.5mm DM actuator spacing to the 200μm lenslet spacing on the Shack-Hartmann wavefront sensor (WFS). A new lenslet array with increased focal lengths will be procured in order to maintain current plate scales. HAKA will initially support science with the near-infrared camera (NIRC2), a single mode fiber fed spectrograph (KPIC + NIRSPEC) and a fast visible imager (ORKID). In addition, a new infrared wavefront sensor (‘IWA) is being designed to support science with ORKID and a suite of new science instruments: a mid-infrared coronagraphic integral field spectrograph (SCALES) and a fiber-fed high-resolution spectrograph (HISPEC). We present the opto-mechanical design of the HAKA DM, Shack-Hartmann WFS upgrades and the ‘IWA system. A mount for the HAKA DM will allow for quick integration and alignment to the Keck ⅠⅠ AO bench. The upgrade to the WFS PRO includes a new set of optics and associated mounting that fits within the mechanical constraints of the existing WFS and meets the requirements of the HAKA DM.
The High-Resolution Infrared Spectrograph for Exoplanet Characterization (HISPEC) is a new instrument for the W. M. Keck Observatory that enables R~100,000 spectroscopy simultaneously across the y, J, H, and K astronomical bands (0.98-2.5μm). The Front-End Instrument (FEI) steers the adaptive optics corrected beam delivered by Keck to single-mode fibers used to route the light to the spectrographs. This paper shows the structural (static and dynamic scenarios) and thermal (cryogenic H2RG tracking camera) design of the Front-End Instrument (FEI).
The High-Resolution Infrared Spectrograph for Exoplanet Characterization (HISPEC) is a new instrument for the W. M. Keck Observatory that enables R∼100,000 spectroscopy simultaneously across the y, J, H, and K astronomical bands (0.98-2.5 μm). The front-end instrument steers the adaptive optics corrected beam delivered by Keck to single-mode fibers used to route the light to the spectrographs. The basic architecture of the front-end instrument leverages from the design from the Keck Planet Imager and Characterizer where a tracking camera is used to monitor the location of the target and send commands to a tip/tilt mirror mounted in a pupil plane, which aligns the beam with the fiber in the downstream focal plane. The system will have an atmospheric dispersion corrector to minimize chromatic smearing of the PSF, phase induced amplitude apodization optics to mitigate coupling limitations imposed by the pupil geometry, and vortex masks to enable vortex fiber nulling. The front-end instrument will utilize a Teledyne H2RG for tracking allowing for the ability to guide on targets as faint as 15th magnitude and for tip/tilt control up to 500 Hz on brighter targets. In this paper we provide an overview of the detailed design of the front-end instrument and elucidate the design choices driven by de-risking exercises. We will describe our plan to utilize the J-H gap for tracking which will allow for uninterrupted science for a large population of targets. We present how the front-end instrument will be integrated into the Keck adaptive optics bench to allow for easy removal and cable management. Finally, we provide an update on the project status and the timeline for the sub-system.
The Keck Planet Finder (KPF) is a fiber-fed, high-resolution, echelle spectrometer that specializes in the discovery and characterization of exoplanets using Doppler spectroscopy. In designing KPF, the guiding principles were high throughput to promote survey speed and access to faint targets, and high stability to keep uncalibrated systematic Doppler measurement errors below 30 cm s−1. KPF achieves optical illumination stability with a tip-tilt injection system, octagonal cross-section optical fibers, a double scrambler, and active fiber agitation. The optical bench and optics with integral mounts are made of Zerodur to provide thermo-mechanical stability. The spectrometer includes a slicer to reformat the optical input, green and red channels (445–600 nm and 600–870 nm), and achieves a resolving power of ∼97,000. Additional subsystems include a separate, medium-resolution UV spectrometer (383–402 nm) to record the Ca II H & K lines, an exposure meter for real-time flux monitoring, a solar feed for sunlight injection, and a calibration system with a laser frequency comb and etalon for wavelength calibration. KPF was installed and commissioned at the W. M. Keck Observatory in late 2022 and early 2023 and is now in regular use for scientific observations. This paper presents an overview of the as-built KPF instrument and its subsystems, design considerations, and initial on-sky performance.
The High-Resolution Infrared Spectrograph for Exoplanet Characterization (HISPEC) is a new instrument for the W. M. Keck Observatory that enables R∼100,000 spectroscopy simultaneously across the y, J, H, and K astronomical bands (0.98-2.5 μm). The fiber delivery subsystem of HISPEC is responsible for routing science and calibration light throughout the observatory efficiently. It consists of high-performance single mode fibers, a photonic lantern, mechanical and MEMS-based fiber switchers that allow for the reconfiguration of light paths. To efficiently cover this large wavelength range, a silica fiber is used for the y&J bands and the 1×3 photonic lantern while a ZBLAN fiber is used for the H&K bands. The HK fiber is a custom design by Le Verre Fluore. The fibers route the science light from the focal point of the adaptive optics system to spectrographs in the basement ∼65 m away, hence, the fibers must be very efficient. To calibrate the instrument, several mechanical fiber switchers can be used to direct calibration light to the spectrograph or the front of the optical train. Some switchers must make over 800 cycles annually, while maintaining sub-3% coupling losses between fibers with core sizes of 4.4 μm. To achieve this, extensive testing was conducted, in which throughput and dust accumulation were monitored to determine how these parameters are impacted by switch preparation procedures and ambient environmental conditions. We developed systems to automatically and remotely clean and image fiber end faces in situ. We have created a protocol that allows us to achieve thousands of switch connections reliably. Additionally, through the 25,000+ switch cycles ran during testing, we identified shortcomings in the design of these mechanical fiber switchers which will be remedied for the final instrument.
HISPEC is a new, high-resolution near-infrared spectrograph being designed for the W.M. Keck II telescope. By offering single-shot, R 100,000 spectroscopy between 0.98 – 2.5 μm, HISPEC will enable spectroscopy of transiting and non-transiting exoplanets in close orbits, direct high-contrast detection and spectroscopy of spatially separated substellar companions, and exoplanet dynamical mass and orbit measurements using precision radial velocity monitoring calibrated with a suite of state-of-the-art absolute and relative wavelength references. MODHIS is the counterpart to HISPEC for the Thirty Meter Telescope and is being developed in parallel with similar scientific goals. In this proceeding, we provide a brief overview of the current design of both instruments, and the requirements for the two spectrographs as guided by the scientific goals for each. We then outline the current science case for HISPEC and MODHIS, with focuses on the science enabled for exoplanet discovery and characterization. We also provide updated sensitivity curves for both instruments, in terms of both signal-to-noise ratio and predicted radial velocity precision.
Since the start of science operations in 1993, the twin 10-meter W. M. Keck Observatory (WMKO) telescopes have continued to maximize their scientific impact and to produce transformative discoveries that keep the observing community on the frontiers of astronomical research. Upgraded capabilities and new instrumentation are provided though collaborative partnerships with Caltech, the University of California, and the University of Hawaii instrument development teams, as well as industry and other organizations. This paper summarizes the performance of recently commissioned infrastructure projects, technology upgrades, and new additions to the suite of observatory instrumentation. We also provide a status of projects currently in design or development phases and, since we keep our eye on the future, summarize projects in exploratory phases that originate from our 2022 strategic plan developed in collaboration with our science community to adapt and respond to evolving science needs.
As part of the Keck Planet Finder (KPF) project, a Fiber Injection Unit (FIU) was implemented and will be deployed on the Keck Ⅰ telescope, with the aim of providing dispersion compensated and tip/tilt corrected light to the KPF instrument and accompanying H&K spectrometer. The goal of KPF is to characterize exoplanets via the radial velocity technique, with a single measurement precision of 30cm/s or better. To accomplish this, the FIU must provide a stable F-number and chief ray angle to the Science and Calcium H&K fibers. Our design approach was use a planar optical layout with atmospheric dispersion compensation for both the Science and Calcium H&K arms. A SWIR guider camera and piezo tip/tilt mirror are used to keep the target centered on the fibers.
The Keck Planet Finder (KPF) is a fiber-fed, high-resolution, high-stability spectrometer in development at the UC Berkeley Space Sciences Laboratory for the W.M. Keck Observatory. KPF is designed to characterize exoplanets via Doppler spectroscopy with a goal of a single measurement precision of 0.3 m s-1 or better, however its resolution and stability will enable a wide variety of astrophysical pursuits. Here we provide post-preliminary design review design updates for several subsystems, including: the main spectrometer, the fabrication of the Zerodur optical bench; the data reduction pipeline; fiber agitator; fiber cable design; fiber scrambler; VPH testing results and the exposure meter.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.