Paper
11 March 2002 Analysis of dry etch loading effect in mask fabrication
Author Affiliations +
Abstract
As the design rule is rapidly decreased, tighter critical dimension (CD) control is highly requested. Considering the mask error enchantment factor, higher mask quality below 8nm should be guaranteed for 0.10micrometers generation devices. Among a number of actors causing CD errors in e-beam mask fabrication, dry etching plays an important role. Therefore, it is necessary to reduce loading effect for accurate CD control. As the loading effect in the dry etching is closely related to the selectivity of Cr to resist, a clue to reduce the loading effect is to reduce loading. In this paper, we will clarify the relation mechanism between the selectivity and loading effect. We will investigate the degree of loading effect by quantifying the selectivity with different etch processes.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jeong-Yun Lee, Sung-Yong Cho, Chang-Hwan Kim, Sung-Woo Lee, Seong-Woon Choi, Woo-Sung Han, and Jung-Min Sohn "Analysis of dry etch loading effect in mask fabrication", Proc. SPIE 4562, 21st Annual BACUS Symposium on Photomask Technology, (11 March 2002); https://doi.org/10.1117/12.458341
Lens.org Logo
CITATIONS
Cited by 7 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Etching

Chromium

Critical dimension metrology

Photomasks

Oxygen

Plasma etching

Dry etching

RELATED CONTENT


Back to Top