Mr. Lian Zhou Profile

Lian Zhou

at China Academy of Engineering Physics

SPIE Involvement:

Author

Publications (13)

Proceedings Article | 20 January 2023 Paper

Research on wear passivation law for diamond grinding wheel based on acoustic emission

Bo Zhong, Lian Zhou, Jie Li, Nan Zheng, Hongjun Liu, Jian Wang, Qiao Xu, Qiancai Wei

Proceedings Volume 12559, 1255907 (2023) https://doi.org/10.1117/12.2651863

KEYWORDS: Signal processing, Sensors, Acoustic emission, Diamond, Spindles, Abrasives, Particles, Silica, Signal attenuation, Lithium, Diamond wheels

Read Abstract +

Proceedings Article | 5 November 2020 Paper

Laser damage and evolution law of scratches on fused silica in etching

Zhigang Yuan, Xiangyang Lei, Nan Zheng, Xianhua Chen, Lian Zhou, Xi Xu, Qinghua Zhang, Jian Wang

Proceedings Volume 11568, 115680D (2020) https://doi.org/10.1117/12.2575700

KEYWORDS: Etching, Laser damage threshold, Laser induced damage, Wet etching, Polishing, High power lasers, Surface finishing

Read Abstract +

Proceedings Article | 31 January 2020 Paper

Experimental research of high quality grinding technology on SiC based on grinding force

Qiancai Wei, Nan Zheng, Lian Zhou, Xianhua Chen, Shijie Zhao, Jie Li, Jian Wang

Proceedings Volume 11427, 114273M (2020) https://doi.org/10.1117/12.2553046

KEYWORDS: Silicon carbide, Surface roughness, Metals, Surface finishing, Abrasives, Diamond, Spindles, Lithium, Optics manufacturing, Reflectors

Read Abstract +

Proceedings Article | 31 January 2020 Paper

Propagation regularity of sub-surface crack in static indentation of fused silica by single abrasive

Lian Zhou, Jie Li, Shijie Zhao, Xianhua Chen, Qinghua Zhang, Jian Wang

Proceedings Volume 11427, 1142706 (2020) https://doi.org/10.1117/12.2548567

KEYWORDS: Silica, Abrasives, Microscopes, Optical components, Microscopy, Diamond, Optics manufacturing

Read Abstract +

Proceedings Article | 18 December 2019 Paper

Key technologies in high efficiency and ultra precision grinding of large aperture and complex aspheric lens

Qiancai Wei, Xianhua Chen, Qinghua Zhang, Jian Wang, Lian Zhou

Proceedings Volume 11342, 1134209 (2019) https://doi.org/10.1117/12.2543178

KEYWORDS: Aspheric lenses, Computer programming, Lens grinding, Raster graphics, Diamond wheels, 3D metrology

Read Abstract +

Proceedings Article | 18 December 2019 Paper

The effect of grinding processing parameters on aspheric small-scale waviness

Jie Li, Qiancai Wei, Lian Zhou, Xianhua Chen, Jian Wang, Qinghua Zhang

Proceedings Volume 11342, 113420C (2019) https://doi.org/10.1117/12.2543501

KEYWORDS: Aspheric lenses, Surface finishing, Polishing, Safety, Manufacturing, Lithium, Analytical research, Aspheric optics, Mirrors, Monochromatic aberrations

Read Abstract +

Proceedings Article | 18 November 2019 Paper

Research on full-aperture surface shape in-situ measurement technology for grinding large diameter optics

Nan Zheng, Qiancai Wei, Lian Zhou, Xianhua Chen, Bo Zhong, Jian Wang

Proceedings Volume 11189, 111890P (2019) https://doi.org/10.1117/12.2537798

KEYWORDS: Aspheric lenses, Photovoltaics, Aspheric optics, Optics manufacturing, Polishing, Interferometers, Sensors, Optical testing, Surface finishing, Infrared radiation

Read Abstract +

Proceedings Article | 18 November 2019 Paper

In-situ detection and evaluation of wear state of micro-powder diamond wheel in optics grinding

Lian Zhou, Xianhua Chen, Qinghua Zhang, Jian Wang, Qiao Xu, Qiancai Wei

Proceedings Volume 11189, 1118904 (2019) https://doi.org/10.1117/12.2536347

KEYWORDS: Diamond wheels, Particles, Image processing, Abrasives, Surface finishing, Diamond machining, Optical components, Binary data, Edge detection, Diamond

Read Abstract +

Proceedings Article | 10 May 2019 Paper

Crack depth uniformity control techniques for large scale fused silica optics in grinding process

Lian Zhou, Nan Zheng, Xianhua Chen, Mincai Liu, Qinghua Zhang, Jian Wang, Jie Li

Proceedings Volume 11068, 1106815 (2019) https://doi.org/10.1117/12.2524151

KEYWORDS: Optical components, Particles, Diamond wheels, Glasses

Read Abstract +

In order to improve the overall efficiency of machining and the defect quality of large aperture fused silica optics, it’s necessary to strictly control the crack defects and their depth uniformity in the first grinding process. Firstly, the morphology of three typical defects affecting the uniformity of crack depth was analyzed, which were scattered superficial sand holes, continuous linear defects and dotted linear defects. Then according to the morphology, the causes were investigated and the control techniques were proposed. The scattered superficial sand holes were caused by the large size glass powder, the diamond particles dropped from the grinding wheel and other foreign body impurities in the grinding fluid, which had been squeezed into the surface of the element by the grinding wheel. Through the clean filtration of grinding fluid, the quantity of such defects could be effectively reduced. The continuous linear defects were caused by stress concentration at the two sharp edges of the grinding wheel. Arcing the two sides of wheel could reduce the machining stress at the edges and avoid the occurrence of continuous linear defects. The dotted linear defects were caused by the stress concentration of the grooves on the surface of the wheel during grinding. After optimizing the dressing parameters to reduce the dressing force and avoid the grains of dressing wheel being embedded into the grinding wheel surface, all the grooves on the wheel surface and all the dashed line defects on the element surface disappeared practically. At the last, after integrating all the above control techniques, the grinding experiment of large scale fused silica optics was carried out. The scattered superficial sand holes, continuous linear defects and dotted linear defects on the surface of element after grinding were obviously alleviated. The crack depth of the whole aperture was between 4μm and 7μm. All the results indicated that the control techniques were efficacious.