We report on recent progress in the development of Laue lenses for applications in hard X/soft gamma-ray astronomy. Here, we focus on the realization of a sector of such a lens made of 11 bent germanium crystals and describe the technological challenges involved in their positioning and alignment with adhesive-based bonding techniques. The accurate alignment and the uniformity of the curvature of the crystals are critical for achieving optimal X-ray focusing capabilities. We assessed how the errors of misalignment with respect to the main orientation angles of the crystals affect the point spread function (PSF) of the image diffracted by a single sector. We corroborated these results with simulations carried out with our physical model of the lens, based on a Monte Carlo ray-tracing technique, adopting the geometrical configuration of the Laue sector, the observed assembly accuracy, and the measured curvatures of the crystals. An extrapolation of the performances achieved on a single sector to an entire Laue lens based on this model shows that a PSF with a half-power-diameter of 4.8 arcmin can be achieved with current technology. This has the potential to lead to a significant improvement in the sensitivity of spectroscopic and polarimetric observations in the 50 to 600 keV band.
BEaTriX (Beam Expander Testing X-ray facility) is the new facility available at the INAF-Osservatorio Astronomico Brera (Merate, Italy) for the calibration of X-ray optics. Specifically designed to measure the point spread function (PSF) and the effective area (EA) of the mirror modules (MM) of the ATHENA X-ray telescope at their production rate, BEaTriX gives the unique possibility to test the optics with a source that approximate an astronomical source, i.e. with a large, parallel X-ray beam (170 × 60 mm2) that fully covers the entrance pupil of the MM. For a fast and precise testing, BEaTriX is a compact facility (9 × 18 m2) with fast vacuum pump-down (to 10-6 mbar), and an optical setup able to create the X-ray beam with a residual divergence of about 2-3 arcsec, HEW, and with a flux of 60 photons/s/cm2. The first beam line at the energy of 4.51 keV is now operative, and a second beam line, working at the energy of 1.49 keV, will be implemented in the coming future. The unique characteristics of the BEaTriX X-ray beam are obtained with an X-ray microfocus source placed in the focus of a paraboloidal mirror, a monochromation stage with 4 symmetrically cut crystals, and an expansion stage where the beam is diffracted and expanded by an asymmetrically-cut crystal. The beam, reflected by the MMs, is then imaged at 12 m distance, where a directly-illuminated CCD camera is placed. This paper presents the facility, the calibration of the beam and the latest results with the ATHENA MMs.
The BEaTriX (Beam Expander Testing X-ray) facility, now operational at INAF-Brera Astronomical Observatory, will represent a cornerstone in the acceptance roadmap of Silicon Pore Optics (SPO) mirror modules, and will so contribute to the final angular resolution of the ATHENA X-ray telescope. By expansion and collimation of a microfocus X-ray source via a paraboloidal mirror, a monochromation stage, and an asymmetric crystal, BEaTriX enables the full-aperture illumination of an SPO mirror module with a parallel, monochromatic, and broad (140 mm ´ 60 mm) X-ray beam. The beam then propagates in a 12 m vacuum range to image the point spread function of the mirror module, directly on a focal plane camera. Currently the 4.51 keV beamline, based on silicon crystals, is operational in BEaTriX. A second beamline at 1.49 keV, which requires a separate paraboloidal mirror and organic crystals (ADP) for beam expansion, is being realized. As for monochromators, the current design is based on asymmetric quartz crystals. In this paper, we show the current optical design of the 1.49 keV beamline and the optical simulations carried out to predict the achievable performances in terms of beam collimation, intensity, and uniformity. In the next future, the simulation activity will allow us to determine manufacturing and alignment tolerances for the optical components. Additional presentation content can be accessed on the supplemental content page.
The BEaTriX (Beam Expander Testing X-ray) facility is now operative at the INAF-Osservatorio Astronomico Brera (Merate, Italy). This facility has been specifically designed and built for the X-ray acceptance tests (PSF and Effective Area) of the ATHENA Silicon Pore Optics (SPO) Mirror Modules (MM). The unique setup creates a parallel, monochromatic, large X-ray beam, that fully illuminates the aperture of the MMs, generating an image at the ATHENA focal length of 12 m. This is made possible by a microfocus X-ray source followed by a chain of optical components (a paraboloidal mirror, 2 channel cut monochromators, and an asymmetric silicon crystal) able to expand the X-ray beam to a 6 cm × 17 cm size with a residual divergence of 1.5 arcsec (vertical) × 2.5 arcsec (horizontal). This paper reports the commissioning of the 4.5 keV beam line, and the first light obtained with a Mirror Module.
Hard x-/soft gamma-ray astronomy (>100 keV) is a crucial field for the study of important astrophysical phenomena such as the 511 keV positron annihilation line in the galactic center region and its origin, gamma-ray bursts, soft gamma-ray repeaters, nuclear lines from SN explosions and more. However, several key questions in this field require sensitivity and angular resolution that are hardly achievable with present technology. A new generation of instruments suitable to focus hard x-/soft gamma-rays is necessary to overcome the technological limitations of current direct-viewing telescopes. One solution is using Laue lenses based on Bragg’s diffraction in a transmission configuration. To date, this technology is in an advanced stage of development and further efforts are being made in order to significantly increase its technology readiness level (TRL). To this end, massive production of suitable crystals is required, as well as an improvement of the capability of their alignment. Such a technological improvement could be exploited in stratospheric balloon experiments and, ultimately, in space missions with a telescope of about 20 m focal length, capable of focusing over a broad energy pass-band. We present the latest technological developments of the TRILL (technological readiness increase for Laue lenses) project, supported by ASI, devoted to the advancement of the technological readiness of Laue lenses. We show the method we developed for preparing suitable bent germanium and silicon crystals and the latest advancements in crystals alignment technology.
BEaTriX (Beam Expander Testing X-ray) is the X-ray facility under construction at the INAF-Osservatorio Astronomico Brera (Merate, Italy) to prove that it is possible to perform the X-ray acceptance tests (PSF and Aeff) of the ATHENA mirror modules at the required rate and with the required accuracy. The unique optical setup makes use of a micro-focus X-ray source with anode in Titanium, a paraboloidal mirror with small radius of curvature, and a set of crystals to monochromate and expand the beam to fully illuminate the entrance pupil of the ATHENA MMs. The quality of the optical components, and their precise alignment, guarantees the production of a parallel beam at 4.51 keV, to be extended in a second phase to 1.49 keV in order to complete the acceptance requirements for the ATHENA MMs. The completion of the facility is expected to occur in July this year, while the commissioning will start in September. In this paper, we present the current status.
A new type of x-ray facility, the Beam Expander Testing x-ray facility (BEaTriX), has been designed and is now under construction at INAF– Osservatorio Astronomico di Brera (Merate, Italy) to perform the acceptance tests of the silicon pore optics modules of the ATHENA X-ray telescope. Crystals of high perfection and large dimensions are needed in order to obtain a wide beam (20 × 6 cm2) with an X-ray divergence <0.5 arcseconds and a x-ray energy purity DeltaE/E<10-5. To generate x-ray diffracted beams at an X-ray energy of 1.49 keV, ammonium dihydrogen phosphate (ADP) crystals have been considered among other possible choices, because of their reported crystal quality and because they can be grown at sufficiently large size. In the present paper, the results of the characterization of crystalline quality and lattice planarity of a 20 × 20 × 2 mm3 ADP sample are reported.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.