The Large Area Detector (LAD) is the high-throughput, spectral-timing instrument designed for the eXTP (enhanced Xray Timing and Polarimetry) mission, a major project of the Chinese Academy of Sciences and China National Space Administration. The eXTP science case involves the study of matter under extreme conditions of gravity, density and magnetism. The eXTP mission is currently performing a phase B study, expected to be completed by the end of 2024. The target launch date is end-2029. Until recently, the eXTP scientific payload included four instruments (Spectroscopy Focusing Array, Polarimetry Focusing Array, Large Area Detector and Wide Field Monitor) offering unprecedented simultaneous wide-band X-ray timing and polarimetry sensitivity. The mission designed was however rescoped in early 2024 to meet the programmatic requirements of a final mission adoption in the context of the Chinese Academy of Sciences. Negotiations are still ongoing at agency level to assess the feasibility of a European participation to the payload implementation, by providing the LAD and WFM instruments, through a European Consortium composed of institutes from Italy, Spain, Austria, Czech Republic, Denmark, France, Germany, Netherlands, Poland, Switzerland and Turkey. At the time of writing, the LAD instrument is thus a scientific payload proposed for inclusion on eXTP. The LAD instrument for eXTP is based on the design originally proposed for the LOFT mission within the ESA-M3 context. The eXTP/LAD envisages a deployed >3 m2 effective area in the 2-30 keV energy range, achieved through the technology of the large-area Silicon Drift Detectors - offering a spectral resolution of up to 200 eV FWHM at 6 keV - and of capillary plate collimators - limiting the field of view to about 1 degree. In this paper we provide an overview of the LAD instrument design and the status of its maturity when approaching nearly the end of its phase B study.
The Enhanced X-ray Timing and Polarimetry (eXTP) mission is a flagship astronomy mission led by the Chinese Academy of Sciences (CAS) and scheduled for launch in 2029. The Large Area Detector (LAD) is one of the instruments on board eXTP and is dedicated to studying the timing of X-ray sources with unprecedented sensitivity. The development of the eXTP LAD involves a significant mass production of elements to be deployed in a significant number of countries (Italy, Austria, Germany, Poland, China, Czech Republic, France). This feature makes the Manufacturing, Assembly, Integration and Test (MAIT), Verification and Calibration the most challenging and critical tasks of the project. An optimized Flight Model (FM) implementation plan has been drawn up, aiming at a production rate of 2 Modules per week. This plan is based on the interleaving of a series of parallel elementary activities in order to make the most efficient use of time and resources and to ensure that the schedule is met.
The Atmospheric Remote-sensing Infrared Exoplanet Large-survey (Ariel), selected as ESA’s fourth mediumclass mission in the Cosmic Vision program, is set to launch in 2029. The objective of the study is to conduct spectroscopic observations of approximately one thousand exoplanetary atmospheres for better understanding the planetary system formation and evolution and identifying a clear link between the characteristics of an exoplanet and those of its parent star.
The realization of the Ariel’s telescope is a challenging task that is still ongoing. It is an off-axis Cassegrain telescope (M1 parabola, M2 hyperbola) followed by a re-collimating off-axis parabola (M3) and a plane fold mirror (M4). It is made of Al 6061 and designed to operate at visible and infrared wavelengths. The mirrors of the telescope will be coated with protected silver, qualified to operate at cryogenic temperatures.
The qualification of the coating was performed according to the ECSS Q-ST-70-17C standard, on a set of samples that have been stored in ISO 6 cleanroom conditions and are subjected to periodic inspection and reflectance measurements to detect any potential performance degradation. The samples consist of a set of Aluminum alloy Al 6061-T651 disks coated with protected silver.
This paper presents the results of the morphological characterization of the samples based on Atomic Force Microscopy (AFM) and the reflectivity measurement in the infrared by Fourier Transform Infrared (FTIR) spectroscopy.
PLATO (PLAnetary Transits and Oscillations of stars)1 is the M3 class ESA mission dedicated to the discovery
and study of extrasolar planetary systems by means of planetary transits detection. PLATO Payload Camera
units are integrated and vibrated at CSL before being TVAC tested for thermal acceptance and performance
verification at 3 different test facilities (SRON, IAS and INTA). 15 of the 26 Flight Cameras were integrated,
tested and delivered to ESA for integration by the Prime between June 2023 and June 2024, with the remaining
flight units to be tested by the end of 2024. In this paper, we provide an overview of our serial testing approach,
some of the associated challenges, key performance results and an up-to-date status on the remaining planned
activities.
The Atmospheric Remote-Sensing Infrared Exoplanet Large Survey (Ariel) is the M4 mission adopted by ESA's "Cosmic Vision" program. Its launch is scheduled for 2029. The mission aims to study exoplanetary atmospheres on a target of ∼ 1000 exoplanets. Ariel's scientific payload consists of an off-axis, unobscured Cassegrain telescope. The light is directed towards a set of photometers and spectrometers with wavebands between 0.5 and 7.8 μm and operating at cryogenic temperatures. The Ariel Space Telescope consists of a primary parabolic mirror with an elliptical aperture of 1.1· 0.7 m, all bare aluminum. To date, aluminum mirrors the size of Ariel's primary have never been made. In fact, a disadvantage of making mirrors in this material is its low density, which facilitates deformation under thermal and mechanical stress of the optical surface, reducing the performance of the telescope. For this reason, studying each connection component between the primary mirror and the payload is essential. This paper describes, in particular, the development, manufacturing, and testing of the Flexure Hinges to connect Ariel's primary Structural Model mirror and its optical bench. The Flexure Hinges are components already widely used for space telescopes, but redesigning from scratch was a must in the case of Ariel, where the entire mirror and structures are made of aluminum. In fact, these flexures, as well as reducing the stress due to the connecting elements and the launch vibrations and maintaining the alignment of all the parts preventing plastic deformations, amplified for aluminum, must also have resonance frequencies different from those usually used, and must guarantee maximum contact (tolerance in the order of a micron) for the thermal conduction of heat. The entire work required approximately a year of work by the Ariel mechanical team in collaboration with the industry.
The Atmospheric Remote-sensing InfraRed Large-survey (ARIEL) is a medium-class mission of the European Space Agency whose launch is planned by late 2029 whose aim is to study the composition of exoplanet atmospheres, their formation and evolution. The ARIEL’s target will be a sample of about 1000 planets observed with one or more of the following methods: transit, eclipse and phase-curve spectroscopy, at both visible and infrared wavelengths simultaneously. The scientific payload is composed by a reflective telescope having a 1m-class primary mirror, built in solid aluminum, and two focal-plane instruments: 1. FGS (Fine Guidance System), performing photometry in visible light and low resolution spectrometry over three bands (from 0.8 to 1.95 µm) 2. AIRS (ARIEL InfraRed Spectrometer) that will perform infrared spectrometry in two wavelength ranges between 1.95 and 7.8 µm. This paper depicts the status of the TA (Telescope Assembly) electric section whose purpose is to deploy sensors, managed by the Telescope Control Unit, for the precise monitoring of the Telescope’s temperatures and the decontamination system, used to avoid the contamination of the optical surfaces (mirrors in primis).
Ariel (Atmospheric Remote-Sensing Infrared Exoplanet Large Survey) is the adopted M4 mission in the framework of the ESA “Cosmic Vision” program. Its purpose is to survey the atmospheres of known exoplanets through transit spectroscopy. The launch is scheduled for 2029. The scientific payload consists of an off-axis, unobscured Cassegrain telescope feeding a set of photometers and spectrometers in the waveband 0.5-7.8 µm and operating at cryogenic temperatures (55 K). The Telescope Assembly is based on an innovative fully aluminium design to tolerate thermal variations to avoid impacts on the optical performance; it consists of a primary parabolic mirror with an elliptical aperture of 1.1 m (the major axis), followed by a hyperbolic secondary that is mounted on a refocusing system, a parabolic re-collimating tertiary and a flat folding mirror directing the output beam parallel to the optical bench. An innovative mounting system based on 3 flexure hinges supports the primary mirror on one of the optical bench sides. The instrument bay on the other side of the optical bench houses the Ariel IR Spectrometer (AIRS) and the Fine Guidance System / NIR Spectrometer (FGS/NIRSpec). The Telescope Assembly is in phase B2 towards the Critical Design Review; the fabrication of the structural and engineering models has started; some components, i.e., the primary mirror and its mounting system are undergoing further qualification activities. This paper aims to update the scientific community on the progress concerning the development, manufacturing and qualification activity of the ARIEL Telescope Assembly.
Ariel (Atmospheric Remote-Sensing Infrared Exoplanet Large Survey) is ESA’s M4 mission of the “Cosmic Vision” program, with launch scheduled for 2029. Its purpose is to conduct a survey of the atmospheres of known exoplanets through transit spectroscopy. Ariel is based on a 1 m class telescope optimized for spectroscopy in the waveband between 1.95 and 7.8 µm, operating at cryogenic temperatures in the range 40–50 K. The Ariel Telescope is an off-axis, unobscured Cassegrain design, with a parabolic recollimating tertiary mirror and a flat folding mirror directing the output beam parallel to the optical bench. The secondary mirror is mounted on a roto-translating stage for adjustments during the mission. The mirrors and supporting structures are all realized in an aerospace-grade aluminum alloy T6061 for ease of manufacturing and thermalization. The low stiffness of the material, however, poses unique challenges to integration and alignment. Care must be therefore employed when designing and planning the assembly and alignment procedures, necessarily performed at room temperature and with gravity, and the optical performance tests at cryogenic temperatures. This paper provides a high-level description of the Assembly, Integration and Test (AIT) plan for the Ariel telescope and gives an overview of the analyses and reasoning that led to the specific choices and solutions adopted.
Ariel (Atmospheric Remote Sensing Infrared Exoplanet Large Survey) [1] [2] is the fourth Mission (M4) of the ESA’s Cosmic Vision Program 2015-2025, selected in March 2018 and officially adopted in November 2020 by the Agency, whose aim is to characterize the atmospheres of hundreds of diverse exoplanets orbiting nearby different types of stars and to identify the key factors affecting the formation and evolution of planetary systems. The Mission will have a nominal duration of four years and a possible extension of two years at least. Its launch is presently scheduled for mid 2029 from the French Guiana Space Centre in Kourou on board an Ariane 6.2 launcher in a dual launch configuration with Comet Interceptor. The baseline operational orbit of the Ariel is a large amplitude halo orbit around the second Lagrangian (L2) virtual point located along the line joining the Sun and the Earth-Moon system at about 1.5 million km (~236 RE) from the Earth in the anti-Sun direction. Ariel’s halo orbit is designed to be an eclipse-free orbit as it offers the possibility of long uninterrupted observations in a fairly stable environment (thermal, radiation, etc.). An injection trajectory is foreseen with a single passage through the Van Allen radiation belts (LEO, MEO and GEO near-Earth environments). This is approximated by a worst-case half orbit, prior the injection and transfer to L2, with a duration of 10.5 hours, a perigee of 300 km (LEO), an apogee of 64000 km (GEO and beyond), and an inclination close to 0 degrees. During both the injection trajectory and the final orbit around L2, Ariel will encounter and interact mainly with the Sun radiation and the space plasma environment. In L2 the Ariel spacecraft will spend most of its time in the direct solar wind and the Earth’s magnetosheath with passages through the magnetotail. These three environments, along with LEO and GEO, can lead to the build-up of a net electric charge on the spacecraft and payload conductive and dielectric surfaces leading to the risk of Electro Static Discharges (ESD), potentially endangering the whole Payload integrity and telecommunications to Ground.
Ariel (Atmospheric Remote-Sensing Infrared Exoplanet Large Survey) is the adopted M4 mission of ESA “Cosmic Vision” program. Its purpose is to conduct a survey of the atmospheres of known exoplanets through transit spectroscopy. Launch is scheduled for 2029. Ariel scientific payload consists of an off-axis, unobscured Cassegrain telescope feeding a set of photometers and spectrometers in the waveband between 0.5 and 7.8 µm, and operating at cryogenic temperatures. The Ariel Telescope consists of a primary parabolic mirror with an elliptical aperture of 1.1 m of major axis, followed by a hyperbolic secondary, a parabolic recollimating tertiary and a flat folding mirror. The Primary mirror is a very innovative device made of lightened aluminum. Aluminum mirrors for cryogenic instruments and for space application are already in use, but never before now it has been attempted the creation of such a large mirror made entirely of aluminum: this means that the production process must be completely revised and fine-tuned, finding new solutions, studying the thermal processes and paying a great care to the quality check. By the way, the advantages are many: thermal stabilization is simpler than with mirrors made of other materials based on glass or composite materials, the cost of the material is negligeable, the shape may be free and the possibility of making all parts of the telescope, from optical surfaces to the structural parts, of the same material guarantees a perfect alignment at whichever temperature. The results and expectations for the flight model are discussed in this paper.
In the context of PLATO Camera Subsystem development, it has been decided to take advantage of MBSE methodologies using Enterprise Architect by Sparx Systems as tool. A Local SysML Camera model for PLATO mission1 has been built from different Excel spreadsheets, i.e. Verification Control Matrices, released by Subsystems. Same approach has been used for the Camera-System itself. The complete flow-down of requirements has been created in order to easily identify and monitor any impact on the design due to changes, deviations and non-compliances. The model can be updated at any time importing Excel spreadsheet while it can be used as source to export documentation needed during formal reviews, both as Word and Excel files. In addition, Model architecture and constraints have been created through Block Definition Diagram and Internal Block Diagram so that structure, interfaces as well as interaction between different items, can be easily identified and monitored at both System and Subsystem level.
PLATO (PLAnetary Transits and Oscillations of stars) is an M3 medium-class space mission in ESA’s Cosmic Vision program devoted to detecting and studying a large number of extrasolar planetary systems. Its launch is planned for the end of 2026 from Europe’s Spaceport in French Guiana. The PLATO Payload consists of 26 wide field-of-view Cameras, each observing a specific part of the sky, associated data processing units and power supply units. The 24 Normal-Cameras will provide a very high-resolution photometric measurement of light from a large number of stars, while the other two Fast Cameras will provide the colour information and will deliver the pointing data to the AOCS (Attitude and Orbital Control System). The Cameras will be integrated into an optical bench. Each of them is composed of the Telescope Optical Unit (TOU), the Focal Plane Assembly (FPA) and the Front-End Electronics (FEE). Currently, the serial production of the Cameras has already started facing critical key points, non-conformities and challenging problems. The status of the Product Assurance activities during the serial production for which the first flight models are being delivered after the AIT phase is reported.
Within the ESA PLATO M3 mission, the Telescope Optical Unit (TOU), i.e. the opto-mechanical unit, is a fully refractive optical system. The 26 TOU Flight Models (FM) to be delivered to the upper level, the PLATO Camera, make it a series production. The first Flight Models production faced many initial challenges from a Product Assurance point of view, mostly related to MAIT activities, while moving forward these challenges decreased. Discrepancies and nonconformities associated with, mainly, but not only, materials and processes, cleanliness and contamination control, safety, qualifications and validations, are the object of this proceeding. Thus, showing that serial production adds one more variable to possible failures, but at the same time, when root causes are corrected and solved, yields less difficulties in subsequent FMs MAIT and final production. Product Assurance, in monitoring the product in failure-proofing aspects, aims at mitigating criticalities and arranging for corrective and preventive actions that allow improving the likelihood of success of the mission.
The CUbesat Solar Polarimeter (CUSP) project is a future CubeSat mission orbiting the Earth aimed to measure the linear polarization of solar flares in the hard X-ray band, by means of a Compton scattering polarimeter. CUSP will allow us to study the magnetic reconnection and particle acceleration in the flaring magnetic structures of our star. The project is in the framework of the Italian Space Agency Alcor Program, which aims to develop new CubeSat missions. CUSP is approved for a Phase B study that will last for 12 months, starting in mid-2024. We report on the current status of the CUSP mission project as the outcome of the Phase A.
The CUbesat Solar Polarimeter (CUSP) project aims to develop a constellation of two CubeSats orbiting the Earth to measure the linear polarization of solar flares in the hard X-ray band by means of a Compton scattering polarimeter on board of each satellite. CUSP will allow to study the magnetic reconnection and particle acceleration in the flaring magnetic structures. CUSP is a project approved for a Phase B study by the Italian Space Agency in the framework of the Alcor program aimed to develop CubeSat technologies and missions. In this paper we describe the a method for a multi-physical simulation analysis while analyzing some possible design optimization of the payload design solutions adopted. In particular, we report the mechanical design for each structural component, the results of static and dynamic finite element analysis, the preliminary thermo-mechanical analysis for two specific thermal cases (hot and cold orbit) and a topological optimization of the interface between the platform and the payload.
KEYWORDS: Monte Carlo methods, Polarimetry, Photons, X-rays, Solar radiation models, Solid modeling, Solar processes, Hard x-rays, Equipment, Compton scattering
The CUbesat Solar Polarimeter (CUSP) project is a CubeSat mission orbiting the Earth aimed to measure the linear polarization of solar flares in the hard X-ray band by means of a Compton scattering polarimeter. CUSP will allow to study the magnetic reconnection and particle acceleration in the flaring magnetic structures of our star. CUSP is a project in the framework of the Alcor Program of the Italian Space Agency aimed to develop new CubeSat missions. It is approved for a Phase B study. In this work, we report on the accurate simulation of the detector’s response to evaluate the scientific performance. A GEANT4 Monte Carlo simulation is used to assess the physical interactions of the source photons with the detector and the passive materials. Using this approach, we implemented a detailed CUSP Mass Model. In this work, we report on the evaluation of the detector’s effective area as a function of the beam energy.
The CUbesat Solar Polarimeter (CUSP) project is a CubeSat mission orbiting the Earth aimed to measure the linear polarization of solar flares in the hard X-ray band by means of a Compton scattering polarimeter. CUSP will allow the study of the magnetic reconnection and particle acceleration in the flaring magnetic structures of our star. CUSP is a project in the framework of the Alcor Program of the Italian Space Agency aimed at developing new CubeSat missions. It is approved for a Phase B study. In this work, we report on the characterization of the Avalanche Photodiodes (APDs) that will be used as readout sensors of the absorption stage of the Compton polarimeter. We assessed the APDs gain and energy resolution as a function of temperature by irradiating the sensor with a 55Fe radioactive source. Moreover, the APDs were also characterized as being coupled to a GAGG scintillator.
The MUlti-slit Solar Explorer (MUSE) is a NASA medium-class explorer mission that is currently in phase B and scheduled for launch no earlier than 2027. The MUSE science investigation aims to use high-resolution and high-cadence spectroscopic and imaging EUV observations of the solar atmosphere to understand the multi-scale physical processes that heat the multi-million-degree solar corona, drive the source of the solar wind, and cause solar activity (flares and coronal mass ejections) that lead to space weather that impacts Earth. MUSE will consist of an EUV context imager and an EUV spectrograph, both requiring normal incidence mirrors with a very high level of polishing and figuring, in order to allow high-resolution imaging and spectroscopy. The mission is led by Lockheed Martin Solar and Astrophysics Laboratory (LMSAL). The payload is being developed by LMSAL and the Center for Astrophysics (CfA) at the Harvard Smithsonian Astrophysical Observatory, while INAF-OAB will produce the focusing mirrors with the financial support of the Italian Space Agency (ASI). In this paper, we describe the first steps that are being taken in the procurement of the focusing mirrors in Zerodur, the work plan with the ion beam figuring and the pitch tool aimed at bringing the surface defects within the specification. Additionally, we describe the metrology system that we are setting up to detect the residual deviation to the final shape.
Ariel (Atmospheric Remote-sensing Infrared Exoplanet Large survey) is the fourth medium-size mission in ESA “Cosmic Vision” program. It is scheduled to launch in 2029. Ariel will conduct spectroscopic and photometric observations of a large sample of known exoplanets to survey their atmospheres with the transit method. Ariel is based on a 1 m class telescope designed for the visible and near infrared spectrum, but optimized specifically for spectroscopy in the waveband between 1.95 and 7.8 μm. Telescope and instruments will be operating in cryogenic conditions in the range 40–50 K. The telescope mirrors will be manufactured in aluminum 6061, with a protected silver coating deposited onto the optical surface to enhance reflectivity and prevent oxidation and corrosion. During the preliminary definition phase of the development work, leading to mission adoption, a silver coating with space heritage was selected and underwent a qualification process on disc-shaped samples of the mirrors substrate material. The samples were deposited through magnetron sputtering and then subjected to a battery of tests, including environmental durability tests, accelerated aging, cryogenic tests and mechanical resistance tests. Further to the qualification, the samples have been stored in cleanroom conditions and periodically re-examined and measured to detect any sign of coating degradation. The test program, still ongoing at the time of writing this article, consists of visual inspection with a high intensity lamp, spectral reflectance measurements and Atomic Force Microscopy (AFM) evaluation of nanometric surface features. The goal is to ensure stability of the optical performance, in terms of coating reflectance, during a time span comparable to the period that the actual mirrors of the telescope will spend in average cleanroom conditions. This study presents the interim results after three years of storage.
The Large Area Detector (LAD) is the high-throughput, spectral-timing instrument onboard the eXTP mission, a flagship mission of the Chinese Academy of Sciences and the China National Space Administration, with a large European participation coordinated by Italy and Spain. The eXTP mission is currently performing its phase B study, with a target launch at the end-2027. The eXTP scientific payload includes four instruments (SFA, PFA, LAD and WFM) offering unprecedented simultaneous wide-band X-ray timing and polarimetry sensitivity. The LAD instrument is based on the design originally proposed for the LOFT mission. It envisages a deployed 3.2 m2 effective area in the 2-30 keV energy range, achieved through the technology of the large-area Silicon Drift Detectors - offering a spectral resolution of up to 200 eV FWHM at 6 keV - and of capillary plate collimators - limiting the field of view to about 1 degree. In this paper we will provide an overview of the LAD instrument design, its current status of development and anticipated performance.
Ariel [1] is the M4 mission of the ESA’s Cosmic Vision Program 2015-2025, whose aim is to characterize by lowresolution transit spectroscopy the atmospheres of over one thousand warm and hot exoplanets orbiting nearby stars. The operational orbit of the spacecraft is baselined as a large amplitude halo orbit around the Sun-Earth L2 Lagrangian point, as it offers the possibility of long uninterrupted observations in a fairly stable radiative and thermo-mechanical environment. A direct escape injection with a single passage through the Earth radiation belts and no eclipses is foreseen. The space environment around Earth and L2 presents significant design challenges to all spacecraft, including the effects of interactions with Sun radiation and charged particles owning to the surrounding plasma environment, potentially leading to dielectrics charging and unwanted electrostatic discharge (ESD) phenomena endangering the Payload operations and its data integrity. Here, we present some preliminary simulations and analyses about the Ariel Payload dielectrics and semiconductors charging along the transfer orbit from launch to L2 included.
Ariel (Atmospheric Remote-Sensing Infrared Exoplanet Large Survey) is the adopted M4 mission in the framework of the ESA “Cosmic Vision” program. Its purpose is to conduct a survey of the atmospheres of known exoplanets through transit spectroscopy. Launch is scheduled for 2029. Ariel scientific payload consists of an off-axis, unobscured Cassegrain telescope feeding a set of photometers and spectrometers in the waveband between 0.5 and 7.8 µm and operating at cryogenic temperatures (55 K). The Telescope Assembly is based on an innovative fully-aluminum design to tolerate thermal variations avoiding impacts on the optical performance; it consists of a primary parabolic mirror with an elliptical aperture of 1.1 m of major axis, followed by a hyperbolic secondary that is mounted on a refocusing system, a parabolic re-collimating tertiary and a flat folding mirror directing the output beam parallel to the optical bench. An innovative mounting system based on 3 flexure-hinges supports the primary mirror on one side of the optical bench. The instrument bay on the other side of the optical bench houses the Ariel IR Spectrometer (AIRS) and the Fine Guidance System / NIR Spectrometer (FGS/NIRSpec). The Telescope Assembly is in phase B2 towards the Preliminary Design Review to start the fabrication of the structural model; some components, i.e., the primary mirror, its mounting system and the refocusing mechanism, are undergoing further development activities to increase their readiness level. This paper describes the design and development of the ARIEL Telescope Assembly.
Ariel (Atmospheric Remote-sensing Infrared Exoplanet Large-survey) is an ESA M class mission aimed at the study of exoplanets. The satellite will orbit in the lagrangian point L2 and will survey a sample of 1000 exoplanets simultaneously in visible and infrared wavelengths. The challenging scientific goal of Ariel implies unprecedented engineering efforts to satisfy the severe requirements coming from the science in terms of accuracy. The most important specification – an all-Aluminum telescope – requires very accurate design of the primary mirror (M1), a novel, off-set paraboloid honeycomb mirror with ribs, edge, and reflective surface. To validate such a mirror, some tests were carried out on a prototype – namely Pathfinder Telescope Mirror (PTM) – built specifically for this purpose. These tests, carried out at the Centre Spatial de Liège in Belgium – revealed an unexpected deformation of the reflecting surface exceeding a peek-to-valley of 1µm. Consequently, the test had to be re-run, to identify systematic errors and correct the setting for future tests on the final prototype M1. To avoid the very expensive procedure of developing a new prototype and testing it both at room and cryogenic temperatures, it was decided to carry out some numerical simulations. These analyses allowed first to recognize and understand the reasoning behind the faults occurred during the testing phase, and later to apply the obtained knowledge to a new M1 design to set a defined guideline for future testing campaigns.
KEYWORDS: Contamination, Manufacturing, Cameras, Space operations, Picture Archiving and Communication System, Optics manufacturing, Materials processing, Telescopes, Inspection, Contamination control
The TOU is the Telescope Optical Unit for the PLATO ESA mission, consisting of the opto-mechanical unit for each of the 26 Cameras of which PLATO is composed. The TOU is currently in the manufacturing, assembly, integration and testing (MAIT) phase for the Proto Flight Model (PFM) and for Flight Models (FMs). We present the design processes as seen from the Product Assurance (PA) point of view: PA aims at monitoring the design and addresses specific issues related to, among others, materials and processes (these shall be suitable for the purpose and for the life-time of the mission), cleanliness and contamination control (to limit the loss of optical performance), safety, monitoring of qualifications/validations. PA supports the project in failure-proofing aspects to mitigate criticalities, e.g. in the elaboration of non-conformances and deviations that can arise during the design and MAIT process, and/or are highlighted during the reviews for manufacturing, test, and delivery of the related hardware. PA ensures early detection of potential problems and risks for the TOU and arranges for corrective actions that aim at improving the likelihood of success of the mission.
Launched on 2021 December 9, the Imaging X-ray Polarimetry Explorer (IXPE) is a NASA Small Explorer Mission in collaboration with the Italian Space Agency (ASI). The mission will open a new window of investigation—imaging x-ray polarimetry. The observatory features three identical telescopes, each consisting of a mirror module assembly with a polarization-sensitive imaging x-ray detector at the focus. A coilable boom, deployed on orbit, provides the necessary 4-m focal length. The observatory utilizes a three-axis-stabilized spacecraft, which provides services such as power, attitude determination and control, commanding, and telemetry to the ground. During its 2-year baseline mission, IXPE will conduct precise polarimetry for samples of multiple categories of x-ray sources, with follow-on observations of selected targets.
Scheduled to launch in late 2021 the Imaging X-ray Polarimetry Explorer (IXPE) is a Small Explorer Mission designed to open up a new window of investigation -- X-ray polarimetry. The IXPE observatory features 3 identical telescope each consisting of a mirror module assembly with a polarization-sensitive imaging x-ray detector at its focus. An extending beam, deployed on orbit provides the necessary 4 m focal length. The payload sits atop a 3-axis stabilized spacecraft which among other things provides power, attitude determination and control, commanding, and telemetry to the ground. During its 2-year baseline mission, IXPE will conduct precise polarimetry for samples of multiple categories of x-ray sources, with follow-on observations of selected targets. IXPE is a partnership between NASA and the Italian Space Agency (ASI).
Ariel (Atmospheric Remote-Sensing Infrared Exoplanet Large Survey) has been adopted as the M4 mission for ESA “Cosmic Vision” program. Launch is scheduled for 2029. ARIEL will study exoplanet atmospheres through transit spectroscopy with a 1 m class telescope optimized in the waveband between 1.95 and 7.8 μm and operating in cryogenic conditions in the temperature range 40-50 K. Aluminum alloy 6061, in the T651 temper, was chosen as baseline material for telescope mirror substrates and supporting structures, following a trade-off study. To improve mirrors reflectivity within the operating waveband and to protect the aluminum surface from oxidation, a protected silver coating with space heritage was selected and underwent a qualification campaign during Phase B1 of the mission, with the goal of demonstrating a sufficient level of technology maturity. The qualification campaign consisted of two phases: a first set of durability and environmental tests conducted on a first batch of coated aluminum samples, followed by a set of verification tests performed on a second batch of samples coated alongside a full-size demonstrator of Ariel telescope primary mirror. This study presents the results of the verification tests, consisting of environmental (humidity and temperature cycling) tests and chemical/mechanical (abrasion, adhesion, cleaning) tests performed on the samples, and abrasion tests performed on the demonstrator, by means of visual inspections and reflectivity measurements.
IXPE (Imaging X-ray Polarimetry Explorer) is the next Nasa Small Explorer mission foreseen for the lunch in 2021. It is a partnership with the Italian Space Agency (ASI). IXPE is devoted to X-ray polarimetry in the 2-8 keV energy band. The IXPE telescope comprises three grazing incidence mirror modules coupled to three detector units hosting each one a Gas Pixel Detector (GPD) polarimeter. The GPD exploits the photoelectric effect to measure the linear polarization of the X-ray emission from astrophysical sources. A wide and accurate on ground calibration was carried out on the IXPE detector units at INAF-IAPS in Italy. A dedicated facility was set-up to calibrate the detector units with polarized and unpolarised X-rays at different energies before Instrument integration.
IXPE (Imaging X-ray Polarimetry Explorer) is a NASA SMEX in a partnership with ASI. The focal plane Detector Units (DUs) and the Detector Service Unit (DSU) were developed by the Italian research Institutes INAF-IAPS and INFN and were manufactured by OHB-I. IXPE will investigate X-ray polarimetry in the 2-8 keV energy band. The payload comprises three identical telescopes, each composed of a mirror and a detector unit with an X-ray polarimeter based on the Gas Pixel Detector (GPD). A stray-light collimator (SLC) is mounted on the top of the DU to shield the GPD from background X-rays not coming from the optics. At the bottom of the SLC, an ions-UV filter is mounted to reduce the thermal load and to prevent ions and UV from entering the DU. The ions-UV filters consist mainly of 1 um LUXFilm (based on polyimide). During on-ground calibration activities of the IXPE DUs, X-ray transparency of DU-FM ions-UV filters was measured with monochromatic X-ray at 2.7 keV and 6.4 keV at INAF-IAPS.
IXPE, the Imaging X-ray Polarimetry Explorer, is a NASA SMEX mission with an important contribution of ASI that will be launched with a Falcon 9 in 2021 and will reopen the window of X-ray polarimetry after more than 40 years. The payload features three identical telescopes each one hosting one light-weight X-ray mirror fabricated by MSFC and one detector unit with its in-orbit calibration system and the Gas Pixel Detector sensitive to imaging X-ray polarization fabricated by INAF/IAPS, INFN and OHB Italy. The focal length after boom deployment from ATK-Orbital is 4 m, while the spacecraft is being fabricated by Ball Aerospace. The sensitivity will be better than 5.5% in 300 ks for a 1E-11 erg/s/cm2 (half mCrab) in the energy band of 2-8 keV allowing for sensitive polarimetry of extended and point-like X-ray sources. The focal plane instrument is completed, calibrated and it is going to be delivered at MSFC. We will present the status of the mission at about one year from the launch.
ARIEL, the Atmospheric Remote-sensing Infrared Exoplanet Large-survey mission1-3 was selected in early 2018 by the European Space Agency (ESA) as the fourth medium-class mission (M4) launch opportunity of the Cosmic Vision Program, with an expected launch in late 2028. It is the first mission dedicated to the analysis of the chemical composition and thermal structures of up to a thousand transiting exoplanets atmospheres, which will expand planetary science far beyond the limits of our current knowledge.
Atmospheric Remote-Sensing Infrared Exoplanet Large Survey (Ariel) has been adopted as ESA “Cosmic Vision” M4 mission, with launch scheduled for 2029. Ariel is based on a 1 m class telescope optimized for spectroscopy in the waveband between 1.95 and 7.8 μm, operating in cryogenic conditions in the range 40–50 K. Aluminum has been chosen as baseline material for the telescope mirrors substrate, with a metallic coating to enhance reflectivity and protect from oxidation and corrosion. As part of Phase B1, leading to SRR and eventually mission adoption, a protected silver coating with space heritage has been selected and will undergo a qualification process. A fundamental part of this process is assuring the integrity of the coating layer and performance compliance in terms of reflectivity at the telescope operating temperature. To this purpose, a set of flat sample disks have been cut and polished from the same baseline aluminum alloy as the telescope mirror substrates, and the selected protected silver coating has been applied to them by magnetron sputtering. The disks have then been subjected to a series of cryogenic temperature cycles to assess coating performance stability. This study presents the results of visual inspection, reflectivity measurements and atomic force microscopy (AFM) on the sample disks before and after the cryogenic cycles.
The Athena observatory is the second large class ESA mission to be launched on early 2030’s. One of the two on board instruments is the X-IFU, which is a TES based kilo-pixels array able to perform simultaneous high grade energy spectroscopy (2.5eV@7keV) and imaging over the 5' FoV. The X-IFU sensitivity is degraded by primary particles background (bkg) of both solar and Galactic Cosmic Rays origin, and secondary electrons produced by primaries interacting with the materials surrounding the detector. The TES-array main sensor therefore needs a Cryogenic AntiCoincidence detector (CryoAC) to veto as much as possible such particles. The required residual bkg is 0.005 cts/cm2 /s/keV in 2-10 keV energy bandwidth. The CryoAC is at present baselined as 4 pixels detector made of Silicon suspended absorbers sensed by a network of IrAu TESes, and placed at a distance < 1 mm below the TES-array. On November 2019, Athena has successfully passed the Mission Formulation Review (MFR), thus entering in Phase B. Next close goal is the MAR (Mission Adoption Review) planned in second half of 2022 where all the critical technologies must demonstrate a Technology Readiness Level (TRL) equal to 5. Here we will provide an overview of the CryoAC program advancement involving: 1) the present particle background assessment; 2) the assembly design concept and the related trade-off studies between the present baseline (4 pixels) against a monolithic solution (1 pixel); 2) the technology status (i.e., some results from the integrated chipset test; warm electronics). We will conclude with programmatic aspects.
The NASA/ASI imaging x-ray polarimetry explorer, which will be launched in 2021, will be the first instrument to perform spatially resolved x-ray polarimetry on several astronomical sources in the 2- to 8-keV energy band. These measurements are made possible owing to the use of a gas pixel detector (GPD) at the focus of three x-ray telescopes. The GPD allows simultaneous measurements of the interaction point, energy, arrival time, and polarization angle of detected x-ray photons. The increase in sensitivity, achieved 40 years ago, for imaging and spectroscopy with the Einstein satellite will thus be extended to x-ray polarimetry for the first time. The characteristics of gas multiplication detectors are subject to changes over time. Because the GPD is a novel instrument, it is particularly important to verify its performance and stability during its mission lifetime. For this purpose, the spacecraft hosts a filter and calibration set (FCS), which includes both polarized and unpolarized calibration sources for performing in-flight calibration of the instruments. We present the design of the flight models of the FCS and the first measurements obtained using silicon drift detectors and charge-coupled device cameras, as well as those obtained in thermal vacuum with the flight units of the GPD. We show that the calibration sources successfully assess and verify the functionality of the GPD and validate its scientific results in orbit; this improves our knowledge of the behavior of these detectors in x-ray polarimetry.
Atmospheric Remote-Sensing Infrared Exoplanet Large Survey (ARIEL) is the M4 ESA mission to launch in 2028. ARIEL is based on a 1 m class telescope optimized for spectroscopy in the waveband between 1.95 μm and 7.8 μm (main instrument), operating in cryogenic conditions in the range 50 - 60 K. For the main mirror substrate, the Aluminum 6061 alloy has been chosen as baseline material after a trade- off. The large size of the mirror however (0.6 square meters) presents specific production challenges concerning opto-mechanical stability in cryogenic applications. To minimize risk, the machining, polishing, thermal treatments and coating processes will first be tested on flat samples of 150 mm of diameter and then applied to a full-size demonstrator mirror, before finalizing the design and producing the flight mirror. This study, following a review of existing literature on fabrication of Al 6061 mirrors for spaceborne IR applications will characterize the optical properties of the samples after each phase of thermal treatment with the goal of determining an optimal process for material stress release, figuring and surface finishing and final optical stability in the operating cryogenic environment.
The Imaging X-ray Polarimetry Explorer (IXPE) will add polarization to the properties (time, energy, and position) observed in x-ray astronomy. A NASA Astrophysics Small Explorer (SMEX) in partnership with the Italian Space Agency (ASI), IXPE will measure the 2–8-keV polarization of a few dozen sources during the first 2 years following its 2021 launch. The IXPE Observatory includes three identical x-ray telescopes, each comprising a 4-m-focal-length (grazingincidence) mirror module assembly (MMA) and a polarization-sensitive (imaging) detector unit (DU), separated by a deployable optical bench. The Observatory’s Spacecraft provides typical subsystems (mechanical, structural, thermal, power, electrical, telecommunications, etc.), an attitude determination and control subsystem for 3-axis stabilized pointing, and a command and data handling subsystem communicating with the science instrument and the Spacecraft subsystems.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.